Roller Furling Genoa Measurement Form
Fill out all of the blanks that are appropriate to your boat and main. If the form does not submit you can fax us the form at 480.247.4233 or mail it to us.

1. Maximum Luff Length=
Measured by attaching a tape measure to your Furler Head
Swivel, then raising the halyard to the maximum hoist and
then measuring to the Drum Shackle.
(See Tack and Head Fittings diagram)



2. Max I Dimension=
Measured from the Head Swivel at Max halyard hoist to
the corner of the deck and the hull in line with the mast.



3. Track Location
TF - Track Forward= TA - Track Aft=
(TF and TA should be measured from the base of the
headstay to the forward end of the genoa track, and the
base of the headstay to the aft end of the track respectively)



4. Tack Height - TH=
(Distance from headsaty pin to tack schackle on drum)



5. Roller Furler Make and model:



6. Cover Side: Port Starboard
The side of the sail you want your UV cover on.



7. U.V. Furler Color:

Name:

Boat Type:

email:

Daytime phone:





Untitled Document